controllogix - PowerFlex

albertabound

Member
A
Join Date
Feb 2011
Location
Calgary
Posts
30
I have an Ethernet/IP connected Powerflex 700 Vector drive. My module defined data includes UserDefined Dints. My question is, where can I look to see how that UserDefined data is assigned to which drive parameters. Several are obvious, but a number are not assigned, or assigned and not used. I've downloaded the drive's parameter database with Drive Executive, but custom folders are empty.
 

Similar Topics

P
Powerflex 70 to Controllogix via Devicenet
Something i ran into that has me stumped, hopefully someone can explain. I have powerflex 70's connected to a L7 cpu using a 1788-en2dn. The...
Replies
5
Views
1,370
patrickmoneyy
P
H
Powerflex 40P-E / Controllogix communications
I have a Controllogix PLC that I currently have communicating to a Powerflex 40P-E. I am able to set the speed of the drive without a problem but...
Replies
2
Views
3,816
hobbes
H
S
Controllogix and PowerFlex 70 VFD application
i was wondering if anyone could get me started on an application i have involving a controllogix plc and powerflex 70 vfds (with encoders) on...
Replies
8
Views
7,530
CroCop
C
L
Beckhoff IPC and Controllogix PLC
I'm trying to integrate a Beckhoff IPC with a Controllogix PLC. There is some documentation, on the Beckhoff website, on how to do a PLC-PLC comms...
Replies
0
Views
82
lcabal27
L
T
ControlLogix Redundancy Module Single Mode Fiber
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
103
Ken Moore
Ken Moore
Back
Top Bottom