dash
Lifetime Supporting Member
Is there a way to retrieve the status of a controller connection that you are consuming a tag (or tags) from? Does anyone know of any knowledge base articles.
Is it as simple as using a GSV message to retrieve the fault word from the module that is configured in the I/O list? See picture below.
Using a CLX 5550 processor (V12 firmware) with a 1756-ENBT ethernet module. All the producing controllers are the same setup.
Darren
Is it as simple as using a GSV message to retrieve the fault word from the module that is configured in the I/O list? See picture below.
Using a CLX 5550 processor (V12 firmware) with a 1756-ENBT ethernet module. All the producing controllers are the same setup.
Darren