Controllogix - SCAME 27F (HS81) via Modbus

Chibu

Member
C
Join Date
Feb 2023
Location
Ontario
Posts
49
Hi Guys,

I'm searching for Modbus address register (mapping) for SCAME 27F (HS81) Fire and Gas Panel. I need to pull data from the panel to ControlLogix via a Modbus gateway and I can't seem to find the document.

I would appreciate if anyone could please share this or a link with me.

Regards
 

Similar Topics

L
Beckhoff IPC and Controllogix PLC
I'm trying to integrate a Beckhoff IPC with a Controllogix PLC. There is some documentation, on the Beckhoff website, on how to do a PLC-PLC comms...
Replies
0
Views
82
lcabal27
L
T
ControlLogix Redundancy Module Single Mode Fiber
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
103
Ken Moore
Ken Moore
B
ControlLogix IB16IF and OB16IEF
Hello, I have two 16 point input cards and 1 16 point output card showing module faulted on my IO tree in Logix Designer. The fault code is...
Replies
7
Views
231
Contr_Conn
Contr_Conn
S
ControlLogix Redundancy with EN2TR
Hello, My associate and I are trying to sync up two ControlLogix racks (7-slot chassis) with identical modules. We are able to see the secondary...
Replies
4
Views
214
Contr_Conn
Contr_Conn
J
ControlLogix L71 Reading from 5/80E ver D.1
Trying to setup a message read via Ethernet. I have the path setup as 1, 1, 2, 192.168.66.10 I get an error code 1, ext err 315. I am beating...
Replies
9
Views
253
just_lionel
J
Back
Top Bottom