Hello all,
I was setting up a network with a local chassis containing a 1756-L62 controller and a 1756-CNB ControlNet bridge and a remote chassis containing a 1756-CNB and a 1756-ENBT Ethernet bridge. Connected to this ENBT is a 1794-AENTR Flex I/O adapter and a 2711P-B7C4D8 PanelView Plus 6 700. A rough drawing of the network configuration is attached.
When I downloaded the program I was getting a Code 16#0317 Connection not scheduled error. I uploaded the ControlNet configuration from the scanner and I enabled edits and saved the network configuration. Now the error is gone in the controller's I/O configuration but I have no communication to my PanelView.
To say I'm no expert at networking would be an understatement. Looking at the network configuration does anybody see any possible issues?
I was setting up a network with a local chassis containing a 1756-L62 controller and a 1756-CNB ControlNet bridge and a remote chassis containing a 1756-CNB and a 1756-ENBT Ethernet bridge. Connected to this ENBT is a 1794-AENTR Flex I/O adapter and a 2711P-B7C4D8 PanelView Plus 6 700. A rough drawing of the network configuration is attached.
When I downloaded the program I was getting a Code 16#0317 Connection not scheduled error. I uploaded the ControlNet configuration from the scanner and I enabled edits and saved the network configuration. Now the error is gone in the controller's I/O configuration but I have no communication to my PanelView.
To say I'm no expert at networking would be an understatement. Looking at the network configuration does anybody see any possible issues?