converting a pwx file in proworx 32 to the DCF type

dwirth

Member
D
Join Date
Feb 2012
Location
California
Posts
2
I have a pwx file, which works with Proworx 32 but not with Proworx NxT, which I am using. Anyone with Proworx 32 should be able to convert this file to the DCF type, which is then usable in Proworx NxT. Any help on this is greatly appreciated! any one who can do this please email to [email protected]. thx!!!!!
 

Similar Topics

O
Converting STL to Lader
Hello everyone, can anyone help me with covert the STL code to ladder. Iam using plc s71200. A %DB1.DBX33.7 // angel of vaccum...
Replies
2
Views
217
RVaughan
RVaughan
F
Converting.Rss file to. Pdf for PLC lab
Hello PLCs Forum, I am in a bit of a pickle and was hoping someone could offer me some help. I have a .rss file and just need to see the ladder...
Replies
2
Views
128
fnick50
F
P
Need help Converting STL to SCL in TIA v17
Hello nice to meet you, im new in here, I'm currently trying to convert code written in STL for a S7-400 to SCL for an S7-1500, because when i run...
Replies
5
Views
349
JesperMP
JesperMP
E
Converting SLC500 to CompactLogix
Hello, did anybody know, if there exist an converting cable like the1492-CM1746-M01 (for an 1746-IB16 to an 5069-IB16), for an 1746-HSCE to an...
Replies
3
Views
396
Ernest#Germany
E
L
Converting Powerflexs to ethernet from devicenet
Hello, This will be my first time converting powerflex 40's and 400's from devicenet to ethernet. I did some research, and it seems I will need...
Replies
4
Views
769
Ken Roach
Ken Roach
Back
Top Bottom