Paul351W
Member
I have an application where I am allowing the user to edit 4 different XY value tables using 2 columns of numeric indicators on the Panelview. I am storing the X and Y values in 4 different UDT's, and want to copy the X and Y values into a larger array of DINTs that the Panelview is reading.
I would like to do this every scan if possible, to minimize delay when the operator changes a value.
My UDT is basicly: X (DINT[15])
And I want to copy into a larger array, for example, X would copy into elements 100-114, and Y would copy into elements 115-130. I allow the operator to change either the X or Y values at one time, so there are two possible value states per table, and 4 tables, so I would have to have 240 move statements to cover all the possible scenarios.
I would like to do this every scan if possible, to minimize delay when the operator changes a value.
My UDT is basicly: X (DINT[15])
Y (DINT[15])