Count Revolutions with 1769-HSC

Tarlo

Member
T
Join Date
Aug 2011
Location
Roma
Posts
32
Hi all, i have a L32E processor with a module 1769-HSC and an absolute encoder at 1024.
I was able to show rpm (350 rpm) but i want to count the revolutions that the motor do.
I tried to monitor the channel z with a counter but it can not add up pretty fast.
How can i do?

Thanks all.
 

Similar Topics

S
5094-OF8 Raw Count?
What is the raw count of Allen Bradley Flex Analog Output Module 5094-OF8 raw count?
Replies
1
Views
126
JLand
J
V
Markem NGPCL Print Count
I am working on a Markem X40 printer which uses NGPCL Commands and needs to send commands using a .net program. I need help with the following...
Replies
1
Views
144
valer85
V
E
Pause or Stop encoder count during jog?
Hi, I'm programming in RSLogix 500, and I'm wondering how I would program a Jog command that does not increase the encoder count. Basically we'd...
Replies
3
Views
306
MikeyN
MikeyN
afm
How to account for current decay across motor in my software
Hi all, I am currently working on a software in Automation Studio that is supposed to detect when effort is inputted by a user. This is done via...
Replies
0
Views
600
afm
afm
P
cycle time count
Hi i have project on micrologix 1400 to display cycle time count on HMI. I am beginner. in project i have six input once all input get high it...
Replies
3
Views
809
plshelp2bgnr
P
Back
Top Bottom