5094-OF8 Raw Count?
- Thread starter sagarlkxj
- Start date
JLand
Member
The 5094 family does not have a fixed scaling like many other families of IO do. Open the module in the IO tree and navigate to the configuration tab to view and modify the scaling of the signal to EU value.
Similar Topics
Folks,
Putting together a system utilizing a Control Logix Gen 8 (5580) PLC w/ the L83e CPU.
I'll be connecting to 8 different FLEX-IO drops...
Has anyone used or have feedback on using the built-in thermistors for Cold-junction Compensation on the 5094-RTB3T* modules? We have a project...
-Hello, I have several 5094-AENTR modules in my L84, v33.
Some of them allow "Discover Modules", some don't. Any idea where I should look to find...
PN1651 - ControlLogix 1756-OF8/B modules may exhibit spurious channel 4 through 7 faults.
Rockwell just released this and we have an upcoming...
Hello,
I am trying to do a very simple task (just checking to confirm that all channels work) with a 1756-OF8. However, when I add the module in...
