Cp 340

darko79

Member
D
Join Date
Feb 2006
Location
Serbia
Posts
10
Hi,
I use CP340 module with CPU312C. How to realize signal REQ, when using P_SEND command to send data from CP340 module. I program in S7 SCL v5.3.Can you write me short sequence.I use P_SEND in FB.Thanks
 

Similar Topics

D
Help with TCSEGDB23F24FA M340 Modbus Plus Proxy Module
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
11
Views
288
davexr
D
S
NTP for Schneider M580/M340
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
171
S.Woollett
S
E
Modbus serial data from multiple devices to M340 controller
I have 9 field devices, three METSEPM5110 power meters and six ACE949-2 rs285 interface modules. I want to read this Modbus rtu data through rs485...
Replies
8
Views
327
Enggshab
E
R
M340 as modbus master
I'm using M340 (Schneider Electric) as modbus master. It works fine but if there is a disconnection with the slave, it stops working even after...
Replies
2
Views
445
Corsair
C
T
M340 and SR2MOD03
Hello, I am trying to send sms messages using SR2MOD03 with an M340 and can't find anything related to it on the internet, can you please help...
Replies
0
Views
211
the18
T
Back
Top Bottom