Hi
My devices are as follows:
S7-300 > CPU 315-2DP (6ES7 315-3Fx-0AB0)
PROFIBUS CP342-5 (3425DA02-0XE0)
ASi CP343-2 (343-2AH00-0XA0)
MEMORY CARD MC951/128KB/5V FLASH
(6ES7951-0KG00-0AA0)
PC > CP5613 DP BASE (6GK1561-3AA00)
SOFTWARE ARE:
SIMATIC NET INDUSTRIAL COMMUNICATION PC/WINDOWS 05/2000 S79220-A5406-F000-01
COMPROFIBUS V3.3
COML7 V2.12
OPC SERVER
SETTING PG/PC
WINCC V5.1 S79220-A6045-F000-01
Our problem now is after we replaced the dead backup battery, we ca no longer establish a connection between PC WinCC CP5613 and S7-300 MPI. we have done memory reset but no luck.
LED status on CP342-5 are SF > RED, STOP > AMBER. Error log on WinCC report says " Cannot connect to API_AMX30" error code "0xFFDF_411C, 0x0000_7000.
Please give us clear, straight forward step by step procedure and what software tools to use on how to download GSD or configuration file.
We have tried to download PROFIBUS demo software DPdemo at www.aut.sea.siemens.com/pic/download_1htm but the site is no longer exists. Your kind support will be highly appreciated.
We dont have Step7 nor NCM7. We have only COM PROFIBUS AND COML S7. Please show us how to configure using these two software tools.
Thanks
Joey Dimaculangan
Automation Engineer
Qatar Armed Forces
mob 0974-6871407
My devices are as follows:
S7-300 > CPU 315-2DP (6ES7 315-3Fx-0AB0)
PROFIBUS CP342-5 (3425DA02-0XE0)
ASi CP343-2 (343-2AH00-0XA0)
MEMORY CARD MC951/128KB/5V FLASH
(6ES7951-0KG00-0AA0)
PC > CP5613 DP BASE (6GK1561-3AA00)
SOFTWARE ARE:
SIMATIC NET INDUSTRIAL COMMUNICATION PC/WINDOWS 05/2000 S79220-A5406-F000-01
COMPROFIBUS V3.3
COML7 V2.12
OPC SERVER
SETTING PG/PC
WINCC V5.1 S79220-A6045-F000-01
Our problem now is after we replaced the dead backup battery, we ca no longer establish a connection between PC WinCC CP5613 and S7-300 MPI. we have done memory reset but no luck.
LED status on CP342-5 are SF > RED, STOP > AMBER. Error log on WinCC report says " Cannot connect to API_AMX30" error code "0xFFDF_411C, 0x0000_7000.
Please give us clear, straight forward step by step procedure and what software tools to use on how to download GSD or configuration file.
We have tried to download PROFIBUS demo software DPdemo at www.aut.sea.siemens.com/pic/download_1htm but the site is no longer exists. Your kind support will be highly appreciated.
We dont have Step7 nor NCM7. We have only COM PROFIBUS AND COML S7. Please show us how to configure using these two software tools.
Thanks
Joey Dimaculangan
Automation Engineer
Qatar Armed Forces
mob 0974-6871407