Cpu C200h/omron

Kumala

Member
Join Date
Jun 2008
Location
Lampung
Posts
2
we are there are problem with CPU C200H /OMRON which had was not produced again and suggestion from OMRON INDONESIA to be changed with CPU CS SERIES /1G and the new type haves no communication with Wonderware V.7.1 Intouch and now we still using CPU C200H , requests suggestion and solution Thank you very much for you attantion.


Best Regards,

Kumala.Parlindungan
 
Changing to CS1 processor and upgrading Wonderware would be best option.

You could change processor to C200HE/HG/HX version.
This would require changing I/O backplane and power supply.
These processors should be compatible with your existing version of Wonderware.

Hope this will help.
 
Cpu 200H/Omron

Thank you information and suggestion which you gives to us.

and we would innovate for wonderware v,7.1 becomes v,10.

we expect will make solution.


Best Regard,

Kumala.Parlindungan
 
Last edited:
I don't know if you are in a breakdown situation, but used C200H models can usually found on Ebay for a reasonable price and many ship worldwide. This would allow you time to convert to the newer CPU's.
 

Similar Topics

Our machines plc's are obsoleted. I cant get the programming cable to backup my plc. Pls help ,if any alternative cable or circuit available for...
Replies
2
Views
2,647
Hi, Can someone help me , with telling me the way to connect Omron C200H-CPU-11, with PC having CX-Programmer. See i have Omron C200H-CPU-11, one...
Replies
3
Views
4,652
Hello all, I have a one problem. I would like to upgrade Mitsubishi PLC Q02 to Q03UDVCPU. I have Q02 program and I change to PLC type and try to...
Replies
7
Views
167
Hello everyone! I need to connect to a DL205-1 CPU and, as far as I know, I need to use DirectSOFT 6 software for the connection. Is anyone...
Replies
1
Views
72
hello s7-400h and wincc are connected to each other via Ethernet. I need help on how to do time synchronization
Replies
0
Views
67
Back
Top Bottom