Does anyone have experience of coupling these devices together?
Devices are Simatic 1215 cpu with profinet, and ABB ACS880 drive, with FENA-21 profinet interface card.
I have successfully created hardware configuration at Tia v15.1, and I have managed to get some kind of communication between devices.
At fena-21, LED "HOST" is green, so it's ok..
But LED "MODULE" is flashing once every second->
Manual says: "Device waiting for PROFINET connection.
This may be caused by missing PROFINET
station name configuration or PLC is not
running."
At Simatic site, online diagnostics says for the module Fena-21 that module not reachable.
But I am able to change vlt ip address from the project, and ip changes also to vlt, when i download the project.
Also I can see type and serial number of Fena-21 card, so I think it is communicating somehow..
But CPU will not start and "Module" LED is blinking..
I think it is some parameter from VLT , but I do not know what.
I have done everything according ABB manual..
Devices are Simatic 1215 cpu with profinet, and ABB ACS880 drive, with FENA-21 profinet interface card.
I have successfully created hardware configuration at Tia v15.1, and I have managed to get some kind of communication between devices.
At fena-21, LED "HOST" is green, so it's ok..
But LED "MODULE" is flashing once every second->
Manual says: "Device waiting for PROFINET connection.
This may be caused by missing PROFINET
station name configuration or PLC is not
running."
At Simatic site, online diagnostics says for the module Fena-21 that module not reachable.
But I am able to change vlt ip address from the project, and ip changes also to vlt, when i download the project.
Also I can see type and serial number of Fena-21 card, so I think it is communicating somehow..
But CPU will not start and "Module" LED is blinking..
I think it is some parameter from VLT , but I do not know what.
I have done everything according ABB manual..