I am trying to program a G3 through Crimson 3
if (Part_1_Online)
GotoPage(MAIN_369);
else if (Part_2_Online)
GotoPage(MAIN_369CR);
else if (Part_3_Online)
GotoPage(MAIN_911);
else if (Part_4_Online)
GotoPage(MAIN_3610);
else if (Part_5_Online)
GotoPage(MAIN_909);
else
GotoPage(MAIN);
I have tried running this code as a program and complex neither seems to do anything. It translates and loads. I push the button that is supposed to run the code and I get nothing. I have tried a few attempts to restructure but have failed.
I imagine it is something simple I am over looking, any help would be appreciated. Thanks
if (Part_1_Online)
GotoPage(MAIN_369);
else if (Part_2_Online)
GotoPage(MAIN_369CR);
else if (Part_3_Online)
GotoPage(MAIN_911);
else if (Part_4_Online)
GotoPage(MAIN_3610);
else if (Part_5_Online)
GotoPage(MAIN_909);
else
GotoPage(MAIN);
I have tried running this code as a program and complex neither seems to do anything. It translates and loads. I push the button that is supposed to run the code and I get nothing. I have tried a few attempts to restructure but have failed.
I imagine it is something simple I am over looking, any help would be appreciated. Thanks