Freak
Member
Hi - I have a number of Danfoss VLT2800's onsite from a spanning a number of years. I am unable to locate the correct EDS files to configure the devicenet. I have tried going to the Danfoss site but the ones I get there don't match the version numbers that I can see on RSNetworx.
So if I look at the device properties in RSNetworx it shows versions 28.030 and 31.001 but the eds files I can download are for versions 2.91,3.0, 3.1. When I register these it does not register the ones on my existing networks.
The good news is that the drives are already configured, bad news is I need to look at one of them.
Any suggestions?
Cheers
So if I look at the device properties in RSNetworx it shows versions 28.030 and 31.001 but the eds files I can download are for versions 2.91,3.0, 3.1. When I register these it does not register the ones on my existing networks.
The good news is that the drives are already configured, bad news is I need to look at one of them.
Any suggestions?
Cheers