Angelos
Member
Hi All, i have a FC302 on this profibus network with a number of VLT5000 drives. The existing drive that blew up (VLT5000) has now been replaced with a FC302 and we have installed the MCA114 optin card to translate the profibus control word from a VLT5000 to the FC302. As we dont want to replace the GSD file on the PLC, we rather put in the option card and setup the drive. Anyway, we cannot access the FC302 directly via PC to USB coz it keeps giving an error " unknown option card"
We are using MCT10 setup software with version 3.13, the latest update from danfoss site. My question is how to get past this optin error and osetup the drive coz now i have to input the data via keypad on the drive and this really sucks.
We are using MCT10 setup software with version 3.13, the latest update from danfoss site. My question is how to get past this optin error and osetup the drive coz now i have to input the data via keypad on the drive and this really sucks.