i have panelview1000,1394 gmc turbo,imc s-class,1747 aic+ 2 link couplier,slc 5/04 cpu,belden 9842 cable.
i have data problem in my machine.there was an error message which wrote "transmission error" when i send data from panelview to 1394 gmc turbo.i use multiple cable connection in aic+.one of cable connect with link couplier near 1394 gmc turbo,another one connect with link couplier near imc s-class.rockwell turkey said that; dh-485 comminication ports in 1394 gmc turbo was defective.but this error isnt regular.sometimes in 2 days period times or 3 or 5 minutes period times(different times).if ports is defective this error goes on regulary.when machine warning error i shut the machine after 1 or 2 hours i start the machine again sometimes error is ok but sometimes isnt.what are your opinions for this error. so
how are link couplier's connection configuratios in both 1394 gmc turbo and imc s-class's for dh-485?
thank for your helps
i have data problem in my machine.there was an error message which wrote "transmission error" when i send data from panelview to 1394 gmc turbo.i use multiple cable connection in aic+.one of cable connect with link couplier near 1394 gmc turbo,another one connect with link couplier near imc s-class.rockwell turkey said that; dh-485 comminication ports in 1394 gmc turbo was defective.but this error isnt regular.sometimes in 2 days period times or 3 or 5 minutes period times(different times).if ports is defective this error goes on regulary.when machine warning error i shut the machine after 1 or 2 hours i start the machine again sometimes error is ok but sometimes isnt.what are your opinions for this error. so
how are link couplier's connection configuratios in both 1394 gmc turbo and imc s-class's for dh-485?
thank for your helps