ian.smith7
Member
Hi All
I am trying to extract data from an AB Powerflex 700 connected to a SLC505 via a rio link. The first datalink PF700 register is already used and working ok and I know how to set up the other 2 i want in the inverter. What I am having trouble with is which data reg that data will appear in the SLC.
The first data link (16 bit, 1/2link) appears in M1.212, will the next data link appear in M1.213 or 4 and so on.
The transfer is controlled by MOV & COP commands to & from M0 & M1.
Any help is appreciated
Ian Smith
I am trying to extract data from an AB Powerflex 700 connected to a SLC505 via a rio link. The first datalink PF700 register is already used and working ok and I know how to set up the other 2 i want in the inverter. What I am having trouble with is which data reg that data will appear in the SLC.
The first data link (16 bit, 1/2link) appears in M1.212, will the next data link appear in M1.213 or 4 and so on.
The transfer is controlled by MOV & COP commands to & from M0 & M1.
Any help is appreciated
Ian Smith