carlor2
Member
Wondering if someone can help me with the communications setup for a DSPSX000 in Crimson3. I'm not that expirenced with plc's or communications networking.
My project is hooking up 2 cub5pb process meters(setup as pressure displays) and 1 cub5b(rate/counter dispay) to a data station plus(DSPSX000) and a laptop and displaying the four values on the laptop via virtual display. I also want to log these four points of data for later viewing or for export to Excel. Hence the laptop, otherwise I would have gone with one of the G3 products.
I have the rs-485 comm cards for the cub5's and just need help setting up communications and network settings. All the other sections I can get through.
Mainly the network/protocol section.
My project is hooking up 2 cub5pb process meters(setup as pressure displays) and 1 cub5b(rate/counter dispay) to a data station plus(DSPSX000) and a laptop and displaying the four values on the laptop via virtual display. I also want to log these four points of data for later viewing or for export to Excel. Hence the laptop, otherwise I would have gone with one of the G3 products.
I have the rs-485 comm cards for the cub5's and just need help setting up communications and network settings. All the other sections I can get through.
Mainly the network/protocol section.