soop7667
Member
I'm using DDE/OPC Links in excel to aquire data from a 5/04 over a DH+ Network.
As I understand it, after your topic, and address you have L1 = Length and C1 = Columns. So If I put an address of N7:0 and a L9, C1 I should get N7:0 - N7:9 in 10 seperate rows - OR -
If I had N7:0 and a L9, C9 I SHOULD get N7:0 - N:79 in 10 Columns.
That's how I THINK it's supposed to work...BUT...It's not working like that on my excel sheet. SO Am I missing something here or is something screwed up? No matter what I put for L and C It remains the same single link in the same single cell.
As I understand it, after your topic, and address you have L1 = Length and C1 = Columns. So If I put an address of N7:0 and a L9, C1 I should get N7:0 - N7:9 in 10 seperate rows - OR -
If I had N7:0 and a L9, C9 I SHOULD get N7:0 - N:79 in 10 Columns.
That's how I THINK it's supposed to work...BUT...It's not working like that on my excel sheet. SO Am I missing something here or is something screwed up? No matter what I put for L and C It remains the same single link in the same single cell.