GHO III
Member
I am not a programer but I do have to operate a scada system in a water pumping station. We had a short accross a phase on a 2400v busbar above a soft start cabinet and shortly after we have had computer problems. The surge protection in the battery backup must have missed the surge. I have attached a printout that shows an error that our programer seems to not know much about. He is from a company that put the system in but is very slow to fix problems as long as we can pump water. This plays havoc with our reports. Any suggestions would be helpful and appreciated.
p.s. all errors have the same description.
p.s. all errors have the same description.