Hi Guys,
Has anyone ever displayed error codes from a cip drive to a HMI?
I contacted Rockwell and they gave me a sample bit of code but it will only open on V28. The manuals surprisingly, are a bit vague. Getting up axis status seems to be straight forward enough as long as you know the corresponding Hex/Decimal values.
Any help would be appreciated.
Daffi
Has anyone ever displayed error codes from a cip drive to a HMI?
I contacted Rockwell and they gave me a sample bit of code but it will only open on V28. The manuals surprisingly, are a bit vague. Getting up axis status seems to be straight forward enough as long as you know the corresponding Hex/Decimal values.
Any help would be appreciated.
Daffi