edwardeduful
Member
Hello Guys,
Please i just upgraded the contactor and the current senisng module on an E3 relay, the old current sensing module was 9-45A and the new one is 18-90A.
I have logged onto the 193-DNETCAT WEB manager and that device is showing
electronic key mismatch, it does not allow me to have access to the parameters to change the overload settings.
If i check on the scan list-Advance tab, the electronic keys still remains the same as the other devices.
My challenge is how to get this electronic key mismatch correct and and save the new configuration of 18-90A for the E3 relay.
Please your inputs will be appreciated
Please i just upgraded the contactor and the current senisng module on an E3 relay, the old current sensing module was 9-45A and the new one is 18-90A.
I have logged onto the 193-DNETCAT WEB manager and that device is showing
electronic key mismatch, it does not allow me to have access to the parameters to change the overload settings.
If i check on the scan list-Advance tab, the electronic keys still remains the same as the other devices.
My challenge is how to get this electronic key mismatch correct and and save the new configuration of 18-90A for the E3 relay.
Please your inputs will be appreciated