Hello,
I work at a facility where there are a number of older 9030's that we communicate with a Laptop with Eclipse software installed, which is setup as strictly a DOS laptop. We are eventually replacing the aging 9030's whenever the opportunity or budget arises.
We have also been installing (replacing the 9030's) with 3Xi's. I have a laptop with Proficy ME 7.0 installed and use it for the 3Xi's.
What I want to achieve is to eliminate the use of the DOS laptop with Eclipse and only have one laptop that can communicate with the 9030's and 3 Xi's. The 9030's were programmed as state Logic, that's why the Eclipse was used.....Is this possible to do?
Or is there a GE "fix all software" that can talk to older 9030's programmed with state logic as well as 3Xi's programmed in ladder logic? <or> Can I convert the 9030 state logic to something the Proficy can understand?
Thanks in advance...
I work at a facility where there are a number of older 9030's that we communicate with a Laptop with Eclipse software installed, which is setup as strictly a DOS laptop. We are eventually replacing the aging 9030's whenever the opportunity or budget arises.
We have also been installing (replacing the 9030's) with 3Xi's. I have a laptop with Proficy ME 7.0 installed and use it for the 3Xi's.
What I want to achieve is to eliminate the use of the DOS laptop with Eclipse and only have one laptop that can communicate with the 9030's and 3 Xi's. The 9030's were programmed as state Logic, that's why the Eclipse was used.....Is this possible to do?
Or is there a GE "fix all software" that can talk to older 9030's programmed with state logic as well as 3Xi's programmed in ladder logic? <or> Can I convert the 9030 state logic to something the Proficy can understand?
Thanks in advance...
Last edited: