NeedHelp2019
Member
Hello,
I'm looking to setup a test rig in the workshop for testing the likes of the following units;
Elau MC-4 Servo Drives & Pac Drives
[FONT="]MC-4/11/10/400[/FONT]
[FONT="]MC-4/11/03/400[/FONT]
[FONT="][FONT="]MC-4/11/01/400[/FONT][/FONT]
[FONT="][FONT="]PMC-2/11/05/000/00/00/01/00/00[/FONT][/FONT]
[FONT="][FONT="]PMC-2/11/02/000/00/00/00/00/00
[/FONT][/FONT]
[FONT="][FONT="]
[/FONT][/FONT]
[FONT="][FONT="]I'm going to need a motor or two, some power supplies and some control boxes and cabling.[/FONT][/FONT]
[FONT="][FONT="]Has anyone done the likes of this or can you point me in a good direction to help me get started.[/FONT][/FONT]
[FONT="][FONT="]
[/FONT][/FONT]
[FONT="][FONT="]Looking forward to your responses.
[/FONT][/FONT]
I'm looking to setup a test rig in the workshop for testing the likes of the following units;
Elau MC-4 Servo Drives & Pac Drives
[FONT="]MC-4/11/10/400[/FONT]
[FONT="]MC-4/11/03/400[/FONT]
[FONT="][FONT="]MC-4/11/01/400[/FONT][/FONT]
[FONT="][FONT="]PMC-2/11/05/000/00/00/01/00/00[/FONT][/FONT]
[FONT="][FONT="]PMC-2/11/02/000/00/00/00/00/00
[/FONT][/FONT]
[FONT="][FONT="]
[/FONT][/FONT]
[FONT="][FONT="]I'm going to need a motor or two, some power supplies and some control boxes and cabling.[/FONT][/FONT]
[FONT="][FONT="]Has anyone done the likes of this or can you point me in a good direction to help me get started.[/FONT][/FONT]
[FONT="][FONT="]
[/FONT][/FONT]
[FONT="][FONT="]Looking forward to your responses.
[/FONT][/FONT]