Error:Operator Control & Monitoring (301:303) in Step7 5.7

simaran2010

Member
Join Date
Mar 2010
Location
mumbai
Posts
11
Hello,

When trying to enable the Operator Control & Monitoring features in Data blocks of the Step 7 5.7 project it gives the Error of
Operator Control & Monitoring (301:303)

I have attached the errors and software installed on my PC.

Thanks,

Error1.PNG Error2.PNG installed software.PNG
 

Similar Topics

Hi Everyone. Not posted on here for a long time, but I am hoping someone can help me. I am doing a differential pressure calculation in a L27ERM...
Replies
15
Views
208
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
87
Hi Siemens guys! I am experiencing SF fault on our S7-300 (6ES7 315-2AH14-0AB0) CPU from time to time. I've checked the diagnostic buffer and...
Replies
13
Views
174
Hello..I am new to Plc.I have Mitsubishi Melsec Fx3Ga-40MR PLC controlling a machine for packing powder.Currently the Plc has issue which power...
Replies
3
Views
143
hello, I'm a student and for my final grade I have to repare a sepro robot. the only problem I have for now is that i have an error code 3...
Replies
0
Views
37
Back
Top Bottom