ESC protocol
- Thread starter Avner
- Start date
rsdoran
Lifetime Supporting Member
I know there were ESC commands used with POS (point of sale printers) made by Epson. I am not sure if this was actually a standard or something Epson created. I searched the Epson site and found this:
http://files.support.epson.com/pdf/pl56p_/pl56p_rm.pdf
I think that is for projectors the older printer stuff it seems they want you to buy the manual.
http://www.epson.com/cgi-bin/Store/...ID=cadcgecggkdgbfdmcfjgckidnk.0¬eoid=17605
You may be able to do a search on the Epson site and found out more.
http://files.support.epson.com/pdf/pl56p_/pl56p_rm.pdf
I think that is for projectors the older printer stuff it seems they want you to buy the manual.
http://www.epson.com/cgi-bin/Store/...ID=cadcgecggkdgbfdmcfjgckidnk.0¬eoid=17605
You may be able to do a search on the Epson site and found out more.
Similar Topics
Hi all,
Currently delving into Wonderware/Aveva System Platform for the first time, and I'm trying to set up a script to automatically write to...
Hello i have two problems currently. I have two screens and when i want to scroll between them i just press the down button and it just goes to...
Hi,
I have some simple question about OP17. I have not this OP with me right now so i cant try this by myself. Also cant find info in manual...
I've started getting back into programming AB, and I was wondering if someone could school me on how to get my comments, descriptions, etc. back...
Dear all,
I want a communication between pc and fx5u. I am considering SLMP protocol. I think it is well documented. But many of the third party...