Derman0524
Member
So i've been at this for a couple days now and it's infuriating.
I have a Siemens 1211C working with TIA v13 and I'm trying to connect an ET200SP with an input and output card but when I can't get the error lights to go off from the ET200SP and the 1211. If i unplug the ET200SP from the 1200, the lights all go green.
When I look at my online diagnostics for each card, I get a message saying 'input/output module not available. Parameter assignment error: Check the version of the module or check the concurrent use of the module'
Any help would be amazing. I have everything connected in network and topology view. I can ping the ET200SP. I can go online but can't get the input and output cards to do anything. Help pls!!
I have a Siemens 1211C working with TIA v13 and I'm trying to connect an ET200SP with an input and output card but when I can't get the error lights to go off from the ET200SP and the 1211. If i unplug the ET200SP from the 1200, the lights all go green.
When I look at my online diagnostics for each card, I get a message saying 'input/output module not available. Parameter assignment error: Check the version of the module or check the concurrent use of the module'
Any help would be amazing. I have everything connected in network and topology view. I can ping the ET200SP. I can go online but can't get the input and output cards to do anything. Help pls!!