Ethernet/IP AB PLC to Data Liner / Message Board / Marquee

celichi

Lifetime Supporting Member
Join Date
Apr 2008
Location
Greater Toronto Area
Posts
415
Hello Everyone,

Does anyone have any suggestions or experince with a message board that could read a tag from a PLC, or have a PLC send a message?

PLCs are Compact Logix, L36ERMs.

I need to display tank level in a production area.

Kind regards - Paul
 

Similar Topics

I need to add a NJ CPU to an existing network made of CJ2 sharing data by Ethernet/IP data links, and cannot get any information in manuals on how...
Replies
3
Views
1,705
Hi guys, I've been using a memory stick to store errors generated on my software by using device link. That works fine, but I would like to store...
Replies
2
Views
3,228
Hello Hello! Rusty here, looking for some advice from the experts! I have just started working on a project that will require an...
Replies
6
Views
8,899
Dear all, Actually I am not familiar with Allen-Bradely PLCs but now we have to figure it out how the PC sends data stream to Allen-Bradely PLC...
Replies
3
Views
4,857
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
87
Back
Top Bottom