Facon PLC with 3 Servo Drives

rakveen

Member
R
Join Date
Jan 2008
Location
*******
Posts
26
Hello,

I have come across an application where I have to use a Facon FBs 20MCT PLC with 3 servos for a table positioning application. How ever, I was able to perform the task using the servo program tables easily. I use 3 program tables (FUN140) for each drive.

My doubt is when configuring the Servo Parameter Table, no where it is linked with a specific set of output or a servo. So how can I differentiate each servo to assign seperate parameter table ?

Regards...
 

Similar Topics

D
fatek facon plc problem
good afternoon to all! this is the first time i had project with fatek facon plc fbn-20mct, during input checking the expansion unit input signal...
Replies
0
Views
2,349
djhowelle
D
I
communication with FACON PLC
HI, Does anyone knows HOW TO MAKE ONLINE with PLC FACON / FATEK type FBe ? What toll that I have to prepare ? especially the cable...
Replies
0
Views
1,762
indra
I
I
Plc facon
Hi, I have PLC type FBE-28MU from brand FACON / FATEK, Taiwan. Can somebody help me to get the SOFTWARE for ONLINE comunication between my...
Replies
0
Views
3,005
indra
I
R
Facon PLC as Modbus TCP Slave
Hello all, One of our application required a Facon FBs 20MCT PLC with a CBE ethernet card on it which should work as a Modbus TCP Slave for a...
Replies
1
Views
4,761
rakveen
R
R
Facon PLC on CAN Open
Hello, I have come across as requirement where I use Facon PLC in our Machines. Our client requires to communicate to the PLC using CAN Open...
Replies
5
Views
5,793
rakveen
R
Back
Top Bottom