Good morning, I'm new to PLC and HMIs, and I was given the following problem: I need to be able to filter alarms and events that are only related to the selected object. On label i used "LS:0 {#5}" and works perfectly. To be more didactic, if it were to work, the solution would be something like this.
https://imgur.com/a/9VlGevk
I've read several forum posts on similar topics, but I couldn't grasp how to use VBA and how to point to the LS:0 #5
https://imgur.com/a/9VlGevk
I've read several forum posts on similar topics, but I couldn't grasp how to use VBA and how to point to the LS:0 #5