AEI Service
Member
I have a print out that was down loaded from a NANO plc that I need to convert to run on a EZ unit.
The line I am not sure about has 2 start inputs, 1 run/jog input, and 3 stop inputs, need help to make the run/jog switch function.
Input 1 NO Start momentary contact, Pushbutton PB1 Main panel
Input 2 NC Stop, Pushbutton PB2
Input 3 * NC Stop, Pushbutton PB3
Input 4 NC Stop, Cover Safety Switch
Input 5 * NC Start momentary contact, Pushbutton PB4
* Second control end machine.
Input 6 Run Jog Switch ON or OFF
Please let me know if more info is needed.
Thanks for any help
Paul
The line I am not sure about has 2 start inputs, 1 run/jog input, and 3 stop inputs, need help to make the run/jog switch function.
Input 1 NO Start momentary contact, Pushbutton PB1 Main panel
Input 2 NC Stop, Pushbutton PB2
Input 3 * NC Stop, Pushbutton PB3
Input 4 NC Stop, Cover Safety Switch
Input 5 * NC Start momentary contact, Pushbutton PB4
* Second control end machine.
Input 6 Run Jog Switch ON or OFF
Please let me know if more info is needed.
Thanks for any help
Paul