Hello, everyone. New user, first post. Happy to have found this place!
Spent the last few weeks learning the hard way (I'm EXTREMELY green )on a project in RsLogix 5000 (my first experience with 5000) for a AB 1769-L30ER processor.
Long story short, upon verifying the program, I received an error due to the L30ER only having 16 Ethernet/IP nodes available for use, and I have 23 Powerflex drives defined in I/O / Ethernet Tree.
We will be installing a L32E processor the customer has on hand to accommodate the Enet needs (It is listed as having 32 nodes available.). Which brings me to the question at hand:
What is the most hassle-free way to go about taking the existing RsLogix 5000 project for a 1769-L30ER (firmware v.24.011) and converting it to a RsLogix 5000 project for a 1769-L32E (Firmware v20)?
Thanks in advance for any pointers!
-Joel
Spent the last few weeks learning the hard way (I'm EXTREMELY green )on a project in RsLogix 5000 (my first experience with 5000) for a AB 1769-L30ER processor.
Long story short, upon verifying the program, I received an error due to the L30ER only having 16 Ethernet/IP nodes available for use, and I have 23 Powerflex drives defined in I/O / Ethernet Tree.
We will be installing a L32E processor the customer has on hand to accommodate the Enet needs (It is listed as having 32 nodes available.). Which brings me to the question at hand:
What is the most hassle-free way to go about taking the existing RsLogix 5000 project for a 1769-L30ER (firmware v.24.011) and converting it to a RsLogix 5000 project for a 1769-L32E (Firmware v20)?
Thanks in advance for any pointers!
-Joel