Front panel of controlLogix card
- Thread starter Prayder
- Start date
Ron Beaufort
Lifetime Supporting Member
I think you're asking about the RTB ... Removable Terminal Block ...
Page 17 of the ControlLogix System Selection Guide might be helpful ...
http://literature.rockwellautomation.com/idc/groups/literature/documents/sg/1756-sg001_-en-p.pdf
.
Page 17 of the ControlLogix System Selection Guide might be helpful ...
http://literature.rockwellautomation.com/idc/groups/literature/documents/sg/1756-sg001_-en-p.pdf
.
Last edited:
Similar Topics
Hello all.... I am not asking you to fix my issue just a little guidance is all i am asking. I just started with a new company and I am working...
Hello,
Anyone can recommend a front panel mount integrated PLC/HMI which has 3 analog input (4-20mA 12bit). 4 Digital Input and 4 Relay Output or...
I have a project where the customer specs will not allow the use of the VFD's STO safety function. They demand dual safety contactors in front of...
Anyone have any good or bad experience with the 755 series drives from AB that have the Active Front end?
I have to approve something for 3...
Does anyone know if the front face of the terminal block can be removed for ease of connecting the wires?
I'm referring to the screws circled in...