Hi All,
I have a machine that is using a Allen Bradley Micrologix 1200 with a panelview 600. Everything was working normally but we had to unplug some wires to change some components and we are now getting the following issue:
I am getting an Error 208, unable to write to remote device and when we touch the screen we get an 683 file access error. We checked the wire connections and everything seems to be secure. The PLC and Panelview are the same and we did not make any changes to them.
Any help will be greatly appreciated!
I have a machine that is using a Allen Bradley Micrologix 1200 with a panelview 600. Everything was working normally but we had to unplug some wires to change some components and we are now getting the following issue:
I am getting an Error 208, unable to write to remote device and when we touch the screen we get an 683 file access error. We checked the wire connections and everything seems to be secure. The PLC and Panelview are the same and we did not make any changes to them.
Any help will be greatly appreciated!