Hi Guys, I'm quite new to FT ME at least with writing expressions, here’s what I'm dealing with. I have set up a multistate indicator to show a status in text of a valve OPEN or CLOSED.
The status of the valve in the plc is under B3:1/15. Under the General tab of the multistate indicator properties> state settings> trigger type I can only specify the trigger as a Value or LSB. How can I use the address of B3:1/15 to make the multistate indicator change.
Thanks
The status of the valve in the plc is under B3:1/15. Under the General tab of the multistate indicator properties> state settings> trigger type I can only specify the trigger as a Value or LSB. How can I use the address of B3:1/15 to make the multistate indicator change.
Thanks