The Cognex activex controls aren't installed on the Panelview.
Now, i'm not sure they CAN be, but you are probably going to need to reach out to Cognex and/or Rockwell to find out.
Offhand, I know that the Cognex VisionView software CAN be installed on a performance panelview 7, there's a knowledge base article I recall seeing once upon a time.
The Cognex activex controls aren't installed on the Panelview.
Now, i'm not sure they CAN be, but you are probably going to need to reach out to Cognex and/or Rockwell to find out.
Offhand, I know that the Cognex VisionView software CAN be installed on a performance panelview 7, there's a knowledge base article I recall seeing once upon a time.
I installed VisionView on the Panelview 7 performance but it alert message that "cant find an Entry Point 'StartDSSPDispatcher' in a PInvoke DLL 'CogPlatform.dll'."
In case anyone else still needs this, I was able to solve the "cant find an Entry Point 'StartDSSPDispatcher' in a PInvoke DLL 'CogPlatform.dll'." problem by using the x86 VisionView installer instead of the ARM.