allscott
Member
- Join Date
- Jul 2004
- Posts
- 1,332
I am working on my first G310 project where I am connected to a slc 5/05 with ethernet and using DF1 Master.
All of my communication appears to be working except for my floating point values. When I enter a value of 100 (F8:16 in this case) into the HMI I get 2.45.....e-42 in the PLC?
Did I miss something?
All of my communication appears to be working except for my floating point values. When I enter a value of 100 (F8:16 in this case) into the HMI I get 2.45.....e-42 in the PLC?
Did I miss something?