Hi
I'm on a customer site, trying to go online with a GE Fanuc 90-30 PLC.
I am using a laptop with actual serial port and Proficy Machine Edition. I'm not sure if the PLC was previously programmed\downloaded to by Proficy or another software. All my port setting and port number are correct but i still cannot go online. is there anything else i need to check? i have tried going online using same machine and same software (proficy) with other PLCs before without any problem.
would this have something to do with the original programming software used?
thanks
I'm on a customer site, trying to go online with a GE Fanuc 90-30 PLC.
I am using a laptop with actual serial port and Proficy Machine Edition. I'm not sure if the PLC was previously programmed\downloaded to by Proficy or another software. All my port setting and port number are correct but i still cannot go online. is there anything else i need to check? i have tried going online using same machine and same software (proficy) with other PLCs before without any problem.
would this have something to do with the original programming software used?
thanks