dragolen Member D Join Date Mar 2012 Location Windsor Posts 5 Jun 26, 2012 #1 Greetings I have a GE Fanuc powewr Mate PLC, FAPT Ladder III program, and all the cables. I cannot get the program to talk to the PLC. I have no problems with the rest we have in the shop, just this one. What am I doing wrong?
Greetings I have a GE Fanuc powewr Mate PLC, FAPT Ladder III program, and all the cables. I cannot get the program to talk to the PLC. I have no problems with the rest we have in the shop, just this one. What am I doing wrong?
jseavers Member J Join Date Oct 2005 Location Central WI Posts 112 Jun 26, 2012 #2 First thing I ussally check is that the comm port is enabled for the PMC. you need to set it to write or enable on your powermate.
First thing I ussally check is that the comm port is enabled for the PMC. you need to set it to write or enable on your powermate.