gencfbewren
Member
Good afternoon, GE FANUC IC693CMM311 PLC communication problem with the Win98 operating system program, have the BGM elite. already working in our system, we wanted to provide communication hardisk crashed again with the new drives, but could not due. I used the program only allows the COM2 port communications and control the ports on LM90 program when I see it works, that is, ports do not have trouble. I use the RS232 and RS485 cables. SNP only mode. When I run the Elite program, "Memoria esaurita (insufficient memory)" I am getting an error. You probably have a problem from the port settings, port settings in the BIOS if you have information about who can help?