ctg_00
Member
IC695CPE305-ADAN Does anyone know what the ADAN means in the part/model number?
Thanks,
ctg
Thanks,
ctg
GE IC695CPE305-ADAN Question
- Thread starter ctg_00
- Start date
Steve Bailey
Lifetime Supporting Member + Moderator
Everything after the dash represents the firmware and revision levels.
You can get Datasheets that detail the different versions here.
Looks like you should update your CPU.
Looks like you should update your CPU.
Similar Topics
Hi
Does anyone know if the IC695CPE305 plc supports writing to holding registers (%R in GE world) using the modbus tcp protocol.
I am reading...
A while back I Converted a GE PCM module over to Modbus TCP. Due to the Discontinue of the IC693CMM321 I am redoing this project again. I am Using...
Hello all,
I have a servo turning a small table on a machine I'm programming. I found that after a day the home position was getting off by a...
Hi,
I just upgraded just restored a ftview hmi data and the trend file have question marks with no lines in the graph. How do i fix this?
Hey all, simple question. Once I create a Macro in my Factory Talk Project, do I need to trigger the macro to run somehow? Or are all macros...