ctg_00
Member
IC695CPE305-ADAN Does anyone know what the ADAN means in the part/model number?
Thanks,
ctg
Thanks,
ctg
GE IC695CPE305-ADAN Question
- Thread starter ctg_00
- Start date
Steve Bailey
Lifetime Supporting Member + Moderator
Everything after the dash represents the firmware and revision levels.
You can get Datasheets that detail the different versions here.
Looks like you should update your CPU.
Looks like you should update your CPU.
Similar Topics
Hi
Does anyone know if the IC695CPE305 plc supports writing to holding registers (%R in GE world) using the modbus tcp protocol.
I am reading...
A while back I Converted a GE PCM module over to Modbus TCP. Due to the Discontinue of the IC693CMM321 I am redoing this project again. I am Using...
Hello again..trying something on an existing poorly written program and just wanted to double check something
system is an A-B MicroLogix 1200
In...
Good morning!
Let me start by saying, I am still learning about this type of HMI programming. I recently watched a video about recipes and how it...
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...