DHoward
Member
Hi - I am converting and existing 90-30 series PLC system with the following:
Rack 0 has power supply, CPU, and 8 Horner 4-20mA input modules (HE693ADC420)
Expansion racks 1-5 have 4-20 mA inputs and outputs, some discreet I/O modules.
I want to just replace Rack 0 with a 16 slot RX3i universal backplane, a CPE310 processor, an EMT001 ethernet module, and an RLE expansion module at the for connection to existing 90-30 racks 1-5. I want to use the 8 horner analog modules in the new univeral rack and verified that horner lists them as compatable. I cannot go on-line with the CPE310 (i tried SNP comm2 port, com1 rs-232 port, and lan port on the cpe310) if I remove the horner modules i can go online just fine. I checked the 5v and 24 v power consumption for the horner and entered it in the hardware configuration in Proficy ME. Has anyone ever encountered this problem? should I just add a rack six making the old rack 0 an expansion rack with these modules in it? I appreciate any input
Rack 0 has power supply, CPU, and 8 Horner 4-20mA input modules (HE693ADC420)
Expansion racks 1-5 have 4-20 mA inputs and outputs, some discreet I/O modules.
I want to just replace Rack 0 with a 16 slot RX3i universal backplane, a CPE310 processor, an EMT001 ethernet module, and an RLE expansion module at the for connection to existing 90-30 racks 1-5. I want to use the 8 horner analog modules in the new univeral rack and verified that horner lists them as compatable. I cannot go on-line with the CPE310 (i tried SNP comm2 port, com1 rs-232 port, and lan port on the cpe310) if I remove the horner modules i can go online just fine. I checked the 5v and 24 v power consumption for the horner and entered it in the hardware configuration in Proficy ME. Has anyone ever encountered this problem? should I just add a rack six making the old rack 0 an expansion rack with these modules in it? I appreciate any input