Hello team,
I am using H0-CTRIO High Speed I/O module with DL-06 PLC. I have to rotate 2 stepper motor in my application. The Stepper drives are SS2000D6 from www.DanaherMotion.com.
I have to set the frequency & pulse raw counts from HMI to rotate the stepper.
I have read the hxctriom.pdf manual & tried the CTRIO Workbench. But I am not able to find the read/write word address for setting the frequency & pulse command. Also the example given in the manual is very difficult to apply in my program. Can you please have any another example to suit my application.
Help !!!!!!
Thanks & Regards,
Pramod
I am using H0-CTRIO High Speed I/O module with DL-06 PLC. I have to rotate 2 stepper motor in my application. The Stepper drives are SS2000D6 from www.DanaherMotion.com.
I have to set the frequency & pulse raw counts from HMI to rotate the stepper.
I have read the hxctriom.pdf manual & tried the CTRIO Workbench. But I am not able to find the read/write word address for setting the frequency & pulse command. Also the example given in the manual is very difficult to apply in my program. Can you please have any another example to suit my application.
Help !!!!!!
Thanks & Regards,
Pramod