Hakko V606 touch screen

[Jezz]

Hi All,
we have 5 on the above screens on site at the moment (all connected to mitsi A's) and I've been asked to see if I can remove one and set it up on an AB SLC 5/03 .

I have a copy of V-SFT editor on an old laptop but I can't find out what cable I need to connect my laptop and the screen to install a next setup.I've got the tutorial and conection manual from the Hakko web site but I can't seem to find what I'm looking for...

Anyone have some ideas???

 

[Jezz]

Has anyone even used one of these??

 

[harryting]

http://www.plctalk.net/qanda/showthread.php?threadid=5642&highlight=hakko

this may be useful

 

[Tim]

Go here, find your distributor.
http://www.hakko-elec.co.jp/eng/support/contact/index.html#3

Call them up and tell them you need one of these.

 

[Jezz]

Has any one got a connection diagram for the above cable (V6-CP),because as always I'm working to a budget of £0.00

 

[ArikBY]

HERE IS THE CONNCTION DIAGRAM FOR HAKKO V6

 

[ArikBY]

Here is the setup on AB 5/03
I have some Hakko panels with AB and they work great.

 

[eddiechiacp]

I have this IAI cylinder, part no :RCP-RSWI-H-100, the driver I tried to connect is RCA-S-RSW. When I turn on, there is an alarm error on the driver with the red lamp on. I tried to retrive th error message from the driver, it stated that "poles sense error". Is it the encorder spoit or any way to get rid of the alarm error. thanks