Blowmolding101
Member
Hi hello. I’ve invested tons of time and money into retrofitting an old blowmolding machine to run plastic fuel tanks/Jerry cans. My machine is a 2004 Bekum BM506 and it has 7 extruders. We initially had lots of drive errors in communications but have cleaned up all cable framing errors etc that we seem to be told by the STAT diagnostics.
We continue having a PLC4 heartbeat failure which kicks the machine to a status called “time slot not running”. It’s really become a burden with all the downtime and poor troubleshooting.
If anyone thinks they could help…
We continue having a PLC4 heartbeat failure which kicks the machine to a status called “time slot not running”. It’s really become a burden with all the downtime and poor troubleshooting.
If anyone thinks they could help…