saltykarp Member S Join Date Nov 2011 Location Oregon Posts 11 Jan 16, 2012 #1 Does anyone knows how to upload code from a G&L Electronic, PiC0 controller? It has an ethernet port for comm. What kind of software would I need to see the code in the PLC?
Does anyone knows how to upload code from a G&L Electronic, PiC0 controller? It has an ethernet port for comm. What kind of software would I need to see the code in the PLC?
DamianInRochester Lifetime Supporting Member Join Date Jan 2011 Location Rochester NY Posts 1,292 Jan 16, 2012 #2 Are you sure it is not a PIC90 or PIC900? Are you sure that is actually an Ethernet port? Generally speaking I am unaware of any G&L product that supports an upload that can provide you with a development file.
Are you sure it is not a PIC90 or PIC900? Are you sure that is actually an Ethernet port? Generally speaking I am unaware of any G&L product that supports an upload that can provide you with a development file.
rootboy Lifetime Supporting Member Join Date Jan 2004 Location Tennessee Posts 1,375 Jan 16, 2012 #3 My best guess is to get with these folks: http://www.glcontrols.com/Products/pic.htm