HELP!!! Cannot Online Edit in PLC 5/80

Patrickyn

Member
P
Join Date
Aug 2010
Location
CDO
Posts
7
We cannot do online edit in our PLC 5/80 CPU. It seems like it is "read only". I need an expert advice regarding this matter. Can anyone share his/her idea? I will greatly appreciate any help.

Thanks...
 

Similar Topics

P
Cannot open WinCC Project V6 help
Hi, Im trying to open an old old Siemens WinCC project. It doesnt have to run i just want to look at the project in WinCC explorer. Its...
Replies
2
Views
734
PimpinDownunder
P
P
Help in Controlnet - Device cannot be detected
Hi guys, I have two two 1732-ACNR point IOs that cannot be detected in the controlnet network. The problem started after a plant shutdown due to...
Replies
0
Views
1,511
Purrdie
P
S
Citect Web Client - Help
Hello everyone. Could someone please assist me? I am using Citect version 7.2 service pack 5 and Windows 7. I have created a project...
Replies
0
Views
67
Sirwan
S
C
Chevalier FSG-2460TX Help
Hello, I'm not sure if anyone can help me. I made a big mistake by pulling out the battery to swap it with the machine turned off, and as a...
Replies
0
Views
51
Chris Reed
C
C
Panelview Plus 7 Help
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Replies
3
Views
114
patrickmoneyy
P
Back
Top Bottom