I have a customer who has a Galileo app that is about 5 years old. We bought the Galileo software from Moeller to make some small changes. I don’t find the product to be very intuitive (at least not to me) and I have very little CE experience. I have a few questions so feel free to answer any or all. It will be greatly appreciated!
1.The current app uses an INGEAR OPC server. I would like to use the AB Ethernet / IP driver that is now available. Do I have to upgrade the CE version to do this? And if so does that require a new license? If I have to stay with the INGEAR OPC do I need a licensee just to change the IP address of the plc that the app is communicating to?
2. When I changed the protocols I’m having to go into each tag and change the address structure. Surely there is an automatic way of doing this.
3. Is there a published procedure for upgrading apps? I don’t find much on the Moeller site.
1.The current app uses an INGEAR OPC server. I would like to use the AB Ethernet / IP driver that is now available. Do I have to upgrade the CE version to do this? And if so does that require a new license? If I have to stay with the INGEAR OPC do I need a licensee just to change the IP address of the plc that the app is communicating to?
2. When I changed the protocols I’m having to go into each tag and change the address structure. Surely there is an automatic way of doing this.
3. Is there a published procedure for upgrading apps? I don’t find much on the Moeller site.