Help Identifying Connector

ndzied1

Lifetime Supporting Member
Join Date
Aug 2002
Location
Chicago, Illinois
Posts
2,857
Hello,

I'm looking for a source for the white connectors in the picture below. This controller has 6.3mm spade connectors potted into it in rows. We can fit single spade connectors on the tabs but I would like to find these white connectors if possible to aid in cable management. The controller has groups of 4, 6 and 8 positions.

IFM.png
 

Similar Topics

Attached is a picture of a PLC from the mid to late 80's... It is currently running a machine that is struggling after a power disruption. Can...
Replies
22
Views
8,381
Hey guys I have a picture of a PLC and I am not sure which model it is. It looks like a Point I/O but that's all I got.
Replies
7
Views
3,103
I've got a picture from one of our customer and I cannot identify one of the module (PLC5). It seems to be serial communication, 4 port. I did a...
Replies
5
Views
1,976
Need help identifying the make/model of this valve position sensor, there are no definable markings, it came off of an air actuator for a liquid...
Replies
5
Views
2,014
Can anyone give me the part number for this module? I am looking for the data sheet on the 25 pin ports. thanks
Replies
3
Views
1,787
Back
Top Bottom